Adder AdderView Matrix C110 (HDMI)

574,75 Incl. btw€475,00 Excl. btw Niet op voorraad, check levertijd
  • ECO friendly webshop
  • Persoonlijk advies
  • 25 jaar ervaring
  • Meer dan 4.000 producten
  • Secure payment
  • Registreer en ontdek je voordelen

Specificaties

Merk:
Adder
Beschikbaarheid:
Niet op voorraad, check levertijd
Levertijd:
2 - 3 weken

Informatie

An ADDERView Matrix C100 Series ZeroU™ IP KVM dongle for extension and matrix of video, audio and USB over a single cable.

The ADDERView Matrix C110 (HDMI) is a ZeroU™ Computer Access Module (CAM) with a HDMI connecter to enable computer systems to be attached to an ADDERView KVM system.

ZeroU™ Form Factor

ZeroU™ Form Factor

The ADDERView Matrix C100 Series takes ZeroU of rack space in the server room allowing for ultimate flexibility and ease of installation.

USB Powered

USB Powered

Using less than 3 Watts, the device can be powered from USB. This means there is no need for an external PSU. Options for powering from an external PSU or redundant PSU are also available.

USB 2.0 with Class Control

USB 2.0 with Class Control

Supports USB devices including graphics tablets, jog shuttles, joysticks, card readers and 3D explorers, alongside mass storage devices. The system can disable types of devices.

Perfect Digital Video in Real-Time

Perfect Digital Video in Real-Time

Using a spatially-lossless encoding system, with 1:1 pixel mapping, the device provides pixel-perfect and color accurate video with no artifacts.

Support for Dithered Video

Support for Dithered Video

Allows dithered analog or noisy video to pass through the system. Some Mac computers use this technique.

EDID Management

EDID Management

Intelligent EDID management allows either the true characteristics of the monitor to be passed back to the computer or a fixed one.

Digital Audio

Digital Audio

The system can deliver USB stereo audio (bi-directional) or embedded video standard stereo audio (uni- directional).

Plug and Play

Plug and Play

ADDERView Matrix devices are delivered in a zero config state so you can plug them in and start working on them straight away. There is no need for drivers or software to be installed.

 

Specifications:

Video Information (for 1 Screen):

  • Maximum Resolution: 2560 x 1600
  • Frame Rate: 60
  • Colour Depth: 8 bpc

Computer Connections

  • USB A: 2 x 2.0 True Emulation, Full Speed, Low Speed, High Speed
  • HDMI: 1

Link Ports

  • 8p8c (RJ45): 1x

Audio Connections

  • Audio Type: Digital
  • Channels: 2
  • Audio In Ports: 1x USB
  • Audio Direction: Bi-directional
  • Size (bit): 16
  • Speed (KHz): 48
  • Additional Information: Digital Audio 2 channel linear PCM

Cable Requirements

  • Recommended Cable Type: CAT5e and above
  • Maximum Cable Length: 100m/328.1 ft

Network Support

  • Bandwidth: 1GbE
  • 10/100 Support: No

Power Source

  • USB Powered: 2x
  • 5V: 1x
  • Power Additional Information: USB power: 2x USB2.0 (2x 500mA @5V) 5W, External Power 5VDC,1A (LPS)

Power Consumption

  • Maximum Power (Watts): 5
  • Typical Power (Watts): 3

Physical Design

  • Width: 55mm/2.2in
  • Height: 25mm/1in
  • Depth: 110mm/4.30in
  • Flying Lead Length: 300mm
  • Weight: 0.2kg/0.4lb

Compatibility

  • OS Compatibility: All known operating systems
  • System Requirements: Does not support HDCP or CEC Control

What's in the box?

  • 1 x AdderView Matrix C110 Computer Access Module (DisplayPort)
  • 1 x Quick Start Guide