Adder Computer Access Module RJ45 Socket - USB, Mini Display Port & Audio (Out)

Informatie

The CATX DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. TheCAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the AdderView® CATx KVM switches and/or Adder extender receivers (either AdderLink® X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are then all linked to the remote device.

Product Features

Resolutions and cable lengths

The maximum resolutions achievable are:
1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.

Power

The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector

Mini DisplayPort 

Some computers, servers and graphics cards (Apple Mac Pro and ATI Radion graphics cards) come with mini DisplayPort connectors as these are smaller than the standard connector. 

EDID display information

The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer.

USB

The CAM supports low speed (1Mb/s) HID USB devices only.

Audio

2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.

Specification

Maximum Video Resolution

1920 x 1200

Extension Distance

1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.

O/S Compatability

Operating system independent

Connectors

Mini Display port Version:
1 x Mini Display Port;
1 x USB- Type A plug;
1 x 3.5 mm jack plug and 1 x RJ45

Physical design

Local: Hi Impact resistance ABS, 45mm /1.75’’ (w) x 75mm / 3’’(d) x 25mm / 1’’ (h) with 300mm/12’’ flying leads Weight 100g / 0.2 lb

Power

USB powered device Max 500mA @ 5V

Operating temperature

0ºC to 40º / 32ºF to 104ºF

Approvals

CE, FCC