Adder Computer Access Module RJ45 Socket - USB, Display Port & Audio (Out)
- ECO friendly webshop
- Personal advice
- 25 years of experience
- Over 4.000 products
- Secure payment
- Register and discover your discounts
Specifications
Information
The CATX DisplayPort Computer Access Modules are highly compact devices that allow you to extend your DisplayPort equipped computer over CATX cable up to 300 meters. TheCAM connects to the DisplayPort video connector plus USB and Audio ports on your computer and then connects via CAT 5, 5e or 6 cabling to the AdderView® CATx KVM switches and/or Adder extender receivers (either AdderLink® X100 or X200), each of which can be located up to 300 meters from the module. Your video display, keyboard, mice and speakers are then all linked to the remote device.
Product Features
Resolutions and cable lengths
The maximum resolutions achievable are:
1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.
Power
The CATX DisplayPort CAM uses the USB port to derive its power from the host computer, dispensing with the need for a separate power supply and thus simplifying installation. Therefore the USB cable must always be connected to a USB port on the computer that is capable of providing up to 500mA. Power is not taken from the DisplayPort connector
EDID display information
The module will check during power up the EDID information available from the KVM switch or extender that is connected to the monitor and passes this back to the computer.
USB
The CAM supports low speed (1Mb/s) HID USB devices only.
Audio
2 channel CD Quality audio is supported via a 3.5mm jack plug. Audio is not available through the display port connector.
Specification
Maximum Video Resolution
1920 x 1200
Extension Distance
1920 x 1200 x 60Hz at 200m
1280 x 1024 x 60Hz at 300m.
O/S Compatability
Operating system independent
Connectors
Display Port version:
1 x Display Port;
1 x USB- Type A plug;
1 x 3.5 mm jack plug and 1 x RJ45.
Physical design
Local: Hi Impact resistance ABS, 45mm /1.75’’ (w) x 75mm / 3’’(d) x 25mm / 1’’ (h) with 300mm/12’’ flying leads Weight 100g / 0.2 lb
Power
USB powered device Max 500mA @ 5V
Operating temperature
0ºC to 40º / 32ºF to 104ºF
Approvals
CE, FCC